Related Links

 

MAXPRO200

Operating data
  • Virtually dross-free cutting capacity
    - Mild steel 20 mm (3/4")
  • Production pierce capacity
    - Mild steel 32 mm (1-1/4")
    - Stainless steel 25 mm (1")
  • Severance
    - Mild steel 75 mm (3")
    - Stainless steel 64 mm (2-1/2")
  • Overview
  • Benefits
  • Specifications

The MAXPRO200 plasma cutting system achieves impressive cut speeds, consistent cut quality and exceptional consumable life with air or oxygen plasma gas. Optimized cutting parameters are automatically set and controlled in one step for easy operation. Engineered for heavy-duty, high capacity mechanized and handheld cutting and gouging, the MAXPRO200 delivers reliable performance across a wide range of industrial applications.

Maximized productivity

MAXPRO200 combines fast cutting speeds and quick process changes to maximize productivity.

  • The fastest cut speeds in its class produce more finished parts per hour.
  • Engineered with 100% duty cycle for the most demanding production environments.
  • Quickly transition between cutting, gouging, mechanized and handheld processes with automatic settings, tool free leads and optional quick disconnect torches.
Easy operation

The easiest plasma system in its class for air and oxygen plasma cutting – easy to install, easy to operate, easy to maximize performance.

  • Intuitive one step interface and automatic gas control deliver consistent results without operator intervention.
  • Advanced diagnostics simplify troubleshooting and service.
  • Optional serial communications allow full control of the system from the CNC.
Low operating cost

Exceptional consumable life and consistent performance deliver more cost-effective results.

  • Do more with less power: patented consumable designs enable best in class cut speeds and robust production piercing using lower amperage levels.
  • Superior cut quality and consistency minimize high cost secondary operations.
  • Advanced consumable technologies including LongLife, CoolFlow™ and TrueFlow™ significantly increase consumable life to reduce cost per part.
Reliable performance

Engineered and tested using the same proven design process as the HyPerformance® HPRXD® product family for superior reliability in the most demanding cutting environments.

  • During development, Hypertherm systems endure rigorous reliability testing procedures equivalent to years of use in extreme operating environments.
  • The MAXPRO200 is built with less than half the number of internal parts compared to other systems on the market. Fewer parts provide greater reliability and serviceability.
  • Self-diagnostics are performed automatically at startup and continually throughout the cutting process.
Input voltages 200/208 VAC, 3-PH, 50 Hz, 108/104 A
220 VAC, 3-PH, 50 – 60 Hz, 98 A
240 VAC, 3-PH, 60 Hz, 90 A
380 VAC, 3-PH, 50 Hz, 57 A
400 VAC, CE, 3-PH, 50 – 60 Hz, 54 A
415 VAC, CE, 3-PH, 50 Hz, 52 A
440 VAC, 3-PH, 50 – 60 Hz, 49 A
480 VAC, 3-PH, 60 Hz, 45 A
600 VAC, 3-PH, 60 Hz, 36 A
Output voltage 50 – 165 VDC
Maximum output current 200 A
Duty cycle rating 100% @ 33 kW, at 40° C (104° F)
Operating temperature -10° C to 40° C (+14° F to +104° F)
Power factor 0.98 @ 33 kW output
Maximum OCV 360 VDC
Dimensions 102 cm (40.14") H, 69 cm (27.12") W,
105 cm (41.23") L
Weight 335 kg (740 lbs)
Gas supply
Plasma gas
Shield gas
Supply gas pressure

Air, O2, N2
Air, N2
6.2 +/- 0.7 bar (90 +/- 10 psig)

Operating data

  • Virtually dross-free cutting capacity - mild steel 20 mm (3/4")
  • Production pierce capacity - mild steel 32 mm (1 1/4")
  • Severance * - mild steel 75 mm (3")
  • Bevel - 200 amp consumables support 45 bevel capability
Material Current
(amps)
Thickness
(mm)
Approx.
cutting speed
(mm/min)
Thickness
(inches)
Approx.
cutting speed
(ipm)
Mild steel
Air plasma
Air shield
50
1
3

8050
3760

20 ga
0.135

340
110
Air plasma
Air shield
130 6
12
3865
2045
1/4
1/2
150
75
Air plasma
Air shield
200 6
12
20
25
32
50
4885
2794
1415
940
630
215
1/4
1/2
3/4
1
1 1/4
2
109
110
60
35
25
8
O2 plasma
Air shield
50 1
3
6775
3650
20 ga
0.135
270
130
O2 plasma
Air shield
130 6
12
3925
2200
1/4
1/2
150
80
O2 plasma
Air shield
200 6
12
20
25
32
50
6210
3415
1920
1430
805
270
1/4
1/2
3/4
1
1 1/4
2
235
130
80
55
32
10
Stainless steel
N2 plasma
N2 shield
200
12
20

220
1140

1/2
3/4

80
50
Air plasma
Air shield
200 12
20
3050
1520
1/2
3/4
120
60

* The thickness that can be severed at approximately 125 mm/min (5 ipm) with reduced cut quality.
Cutting at severance thickness should be infrequent.