Related Links

 

Proline 2260

Proline 2150 Plasma Cutting System
  • Overview
  • Specifications

Description:

The ProLine 2260 offers expanded thickness capability and optimized cutting speeds, and is the highest amperage precision high current density plasma cutting system in the ProLine family. This manually controlled 275 amp system can cut most metals up to 1 ¼’’ (32.0mm) thick, and has a maximum capacity of 2 ½’’ (65.0mm). 

Uncompromising precision cut quality, combined with excellent processing speed and low initial investment, equates to the lowest possible cost to produce quality finished parts.

With the ProLine 2260’s manual controls, you can tailor all of the cutting parameters to your specifications. Optionally, our patented INOVA Torch Height Control System can be built into the ProLine 2260, greatly simplifying installation. 

Whether you need precise, clean, virtually dross-free edges on thinner metals or you need the same high quality when cutting 1 inch steel at 65 inches per minute, the ProLine 2260 can deliver. If your goals include maximum productivity on a wide range of thicknesses, combined with optimum cut quality, economical operation, and modest initial cost, the ProLine 2260 by KALIBURN is the plasma cutting system for you. 

Mild Steel
Production Capacity
Maximum Thickness
(Edge Start, with dross)
1-¼ (32.0mm) 2-½ (65.0mm)

The ProLine 2260 is one of the three systems in the KALIBURN "ProLine" family. The ProLine 2150 and ProLine 2200 Plasma Cutting Systems offer identical cut quality but each has a unique amperage range and corresponding thickness capacity. KALIBURN also offers four fully automated machines in the "Spirit" family; the Spirit150a, Spirit200a, Spirit275a, and Spirit400a Plasma Cutting Machines. These machines are our most advanced systems and provide cut quality identical to the ProLine systems. With Spirit systems, all process parameters are set automatically for ease of operation.

Proline 2260 Torch
  • 275 amps @ 100% duty cycle
  • Dual gass
  • Liquid cooled
  • Built in initial height sensing capability
  • Extended life, low cost consumables
Proline 2260 Power Supply
  • Rated 200 amperes DC @ 100% duty cycle
  • Advanced techology, high efficiency chopper-stabilized current output
  • Dual 600-ampere IGBT chopper transistors for high reliability
  • Current overshoot reduction circuitry for longer electrode and nozzle life
  • Very low transferred arc current sensing for higher starting height and longer nozzle shield life
  • Fast switch transferred arc for extended nozzle life
  • 70 GPH recirculating torch coolant system
  • 0.4 amps pk - pk output current ripple at 275 amps
  • 3-phase input, 53 KVA, 208v (174a), 230v (133a), 380v (81a), 415v (74a), 460v (67a), 575v (53a)
Proline 2260 Manual Gas Console
  • Pannel mounted pressure regulators set preflow, plasma, shield, and postflow gas pressures.
  • Contains optional INOVA torch height control electronics

 Proline 2260 Cut Chart
Material
Thickness
(in.)         (mm)
Current
(Amps)
Speed
(IPM)    (m/min)
Mild Steel











O2 Plasma
O2/Air Shield
.036
0.9
30
105
2.67
.060
1.5
30
78
1.98
.105
2.7
30
55
1.40
.125
3.2
50
180
4.57
.188
4.8
70
130
3.30
.250
6.4
100
150
3.81
.375
9.5
100
100
2.54
.500
12.7
100
65
1.65
.625
15.9
150
70
1.78
.750
19.1
200
75
1.91
1.00
25.4
275
65
1.65
1.25
31.8
275
45
1.14
1.50
38.1
275
24
0.635
1.75
44.5
275
20
0.508
2.00
50.8
275
15
0.381
Material
Thickness
(in.)         (mm)
Current
(Amps)
Speed
(IPM)    (m/min)
Stainless Steel







Air Plasma
Air/N2 Shield
.036
0.9
30
200
5.08
.060
1.5
30
125
3.18
.105
2.7
50
75
1.91
.120
3.0
50
65
1.65
.188
4.8
70
100
2.54
.250
6.4
100
100
2.54
.375
9.5
100
80
2.03
.500
12.7
200
110
2.79
.625
15.9
200
75
1.91
.750
19.1
275
80
2.03
1.00
25.4
275
55
1.40